532nm Single Longitudinal Green laser For Raman
Get Latest PricePayment Type: | T/T |
Incoterm: | EXW |
Min. Order: | 1 Bag/Bags |
Transportation: | Air |
Port: | Beijing,Shenzhen,Hong Kong |
Payment Type: | T/T |
Incoterm: | EXW |
Min. Order: | 1 Bag/Bags |
Transportation: | Air |
Port: | Beijing,Shenzhen,Hong Kong |
Model No.: MSL-III/FN/F/S/DS/RA/R-532
Brand: CNI
Operating Mode: Cw
Spectral Linewidth (nm): <0.00001
Output Power: 1mw-5w
Place Of Origin: China
Status: New
Warranty Period: 1 Year
Mechanical Test Report: Provided
Core Selling Point: Easy To Operate
Features: Compact Design, High Resolution
Selling Units | : | Bag/Bags |
Package Type | : | Static free plastic bag and carton, Protective packing |
Picture Example | : |
CNI launched Raman Spectrometer with the features of compact design, high resolution, high sensitivity, simple measurement and operation, can replace the old spectrophotometer and widely used in chemical and biological research, environmental science, jewelry appraisal, forensic appraisal, food/drug safety inspection, geological exploration and many other fields
532nm single longitudinal mode Green Laser for raman application is made features of ultra compact, long lifetime, low cost and easy operating.It is used in Raman Spectrocopy, DNA sequencing, flow cytometry, cell sorting, optical instrument, spectrum analysis, interference, measurement, holography, physics experiment, etc.
Spectification:
Model | MSL-III-532 | MSL-FN-532 | MSL-F-532 |
Wavelength (nm) | 532±2 | 532±1 | 532±1 |
Operating mode | CW | ||
Output power (mW) | >1, 5, 10, 20, - , 100 | >1, 5, 10, 20, - , 400 | >400, 600, - , 700 |
Power stability (rms, over 4 hours) | <1%, <2%, <3% | <1%, <2%, <3%, | <1%, <2%, <3%, <5% |
Transverse mode | TEM00 | ||
Longitudinal mode | Single | ||
Spectral linewidth (nm) | <0.00001 | ||
Coherent length (m) | >50 | ||
Noise of amplitude (rms, 1Hz~20MHz) | <0.5% | <0.5% | <1%, typical<0.5% |
M2 factor | <1.2(<1.1 optional) | <1.2(<1.1 optional) | <1.5 |
Beam diameter at the aperture (1/e2 , mm) | <1.5 | <1.5 | <2.5 |
Beam divergence, full angle (mrad) | <1.2 | ||
Polarization ratio | | >100:1, Vertical±5 degree (Horizontal Optional) | |
Warm-up time (minutes) | <10 | ||
Pointing stability after warm-up (mrad) | <0.05 | ||
Beam height from base plate (mm) | 24.8 | 27.4 | 45 |
Operating temperature (℃) | 15-35 | ||
Power supply (90-264VAC) | PSU-III-FDA | PSU-H-FDA | PSU-H-FDA |
Expected lifetime (hours) | 10000 | ||
Warranty | 1 YEAR |
Model | MSL-S-532 | MSL-DS-532 |
Wavelength (nm) | 532±2 | 532±1 |
Operating mode | CW | |
Output power (mW) | >1,5,10,20,-,50 | >1,5,10,20,-,100 |
Power stability (rms, over 4 hours) | <1%,<2%,<3% | |
Transverse mode | TEM00 | |
Longitudinal mode | Single | |
Spectral linewidth (nm) | <0.00001 | |
Coherent length (m) | >50 | |
Noise of amplitude (rms, 20Hz~20MHz) | <0.5% | |
M 2 factor | <1.2(<1.1 optional) | |
Beam diameter at the aperture( 1/e2 ,mm) | 0.7±0.05 | |
Beam divergence, full angle (mrad) | <1.5 | |
Polarization ratio | >100:1 Horizontal±5 degree (Vertical Optional) | |
Pointing stability after warm-up (mrad) | <0.05 | |
Pointing stability Over Temp. (µrad/°C) | <8 | |
Warm-up time (minutes) | <5 | |
Beam height from base plate (mm) | 19 | |
Power Consumption(W) | <30 | <6 |
Fiber | | Multimode/ Single Mode |
Shock Tolerance(6ms) | 7g laterally,15g vertically | |
IP Rating | IP67 ,IP65 | |
Power supply(90-264VAC) | PSU-H-FDA ,PSU-A-F | 5V DC (Photoelectric integrated) |
Operating temperature (℃) | 0-60 | 15-35 |
Max. Heat Dissipation of Head(W) | 10W@50℃,4W@25℃ | |
Storage temperature (℃) | | 5-50 |
Modulation | Modulation isn`t available. | |
Expected lifetime (hours) | 10000 | |
Warranty | 1 YEAR |
Model | MSL-RA-532 | MSL-R-532 |
Wavelength (nm) | 532±1 | |
Operating mode | CW | |
Output power (W) | >1, 1.1, 1.2, - , 2 | >1,2...5 |
Power stability (rms, over 4 hours) | <1%, <2%, <3% | <1%,<2%,<3%,<5% |
Transverse mode | TEM00 | |
Longitudinal mode | Single | |
Spectral linewidth (nm) | <0.00001 | |
Coherent length (m) | >50 | |
Noise of amplitude (rms, 1Hz~20MHz) | <1% | |
Beam diameter at the aperture (1/e 2 , mm) | <2 | ~1.5 |
Beam divergence, full angle (mrad) | <1.2 | <1.5 |
M2 factor | <1.2 | |
Warm-up time (minutes) | <10 | <20 |
Pointing stability after warm-up (mrad) | <0.05 | |
Beam height from base plate (mm) | 51 | 59 |
Cooled method | | Water cooled |
Operating temperature (℃) | 20-30 | |
Power supply (90-264VAC) | PSU-H-FDA | PSU-W-FDA |
Expected lifetime (hours) | 10000 | |
Warranty | 1 YEAR |
Copmpany Information
Changchun New Industries (CNI), founded in 1996, located in Changchun, CHINA, is a manufacturer of solid-state and diode Laser systems. CNI possesses accountable and dependable service as well as quality products with compact design, high reliability, excellent performance. The products are widely used for scientific research, equipment manufacturing, biomedical experiment, precision measurement, entertainment, radar communication, material processing, process control, online detection, investigation equipment and other fields.
Exhibitions
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.