589nm 200mw Low Noise Laser performs well because of its ultra compact design, long lifetime, cost -effectiveness and easy operating. Good quality allows it owns high power stability from 1% to 5% optional. Products of modulation, free beam and good beam quality are all available, promising its wide application in scientific experiment, medical measurement, instrument, spectrum analysis, etc.
It is TEM00 mode and the beam diameter at the aperture is nearly 1.5mm. The beam height from base plate is nearly 27.4 mm. The warm-up time is less than 10 minutes and the M2 factor is less than 1.5. Otherwise, the warranty is within one year and the working temperature is between 10-40. The expected liftime is about 10000 hours.
CNI aslo have other wavelengths lasers, such as 532nm. CNI offers the diverse of 532 nm Laser sources for a broad range of industrial, medical and scientific applications. For CW operating mode lasers, the output power is up to 20 W available. For Q-switched operating mode lasers, the High Power Laser series is up to 500 W available, and High Energy Laser series is up to 1000 mJ available.
| Model | MLL-U-589 |
Wavelength (nm)
| 561±1
|
Transverse mode
| TEM00
|
Output power (mW)
| >1, 5, 10, 20, - , 100 | >100, - , 200
|
Power stability (rms, over 4 hours)
| <1%, <2%, <3%
| <2%, <3%, <5%
|
| M2 factor | <1.5
|
Operating mode
| CW
|
Beam divergence, full angle (mrad)
| <1.5
|
Beam diameter at the aperture (1/e2,mm)
| 0.70±0.05
|
Warm-up time (minutes)
| <10
|
Beam height from base plate (mm)
| 27.4
|
Operating temperature (℃)
| 10-40
|
Polarization Ratio
| >100:1, Vertical±5 degree
|
Pointing stability after warm-up (mrad)
| <0.05
|
Max. Laser Head Base plate Temp (°C)
| 50
|
Spectral linewidth (nm)
| <0.003
|
Noise of amplitude (rms, 1Hz~20MHz)
| <0.5%, <1%
|
Laser head consumption(W)
| 15 (typical) , <25 (40℃)
|
Power supply (90-264VAC)
| PSU-W-FDA
|
Modulation option
| TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional
|
| Expected lifetime (hours) | 10000
|
Warranty
| 1 year
|
Certification
Copmpany Information
CNI owns the strong core technologies in lasers, laser systems, optical spectrum analyzer, teaching and laboratory equipment, optical measuring equipment, laser processing equipment, machine vision and the photoelectric detection. There are over 120 technical engineers engaged in the R&D and production, 65 patents and lots of successfully international cooperation projects. The technical strength makes the possibility to serve the customers complete solutions for lasers and laser products
Exhibitions
Contact Now
