Microlaser for Diamond Planning & Marking
Many diamond wholesalers or Jewelry factories need to identify and process the raw diamond, CNI can offer the total solution of diamond planning, marking and identification, also the separate part such as laser source and Raman spectrometer are available.
1064 nm microlaser is a suitable laser source for diamond planning and marking, with perfect marking effect on the middle of the waist line of diamond, the minimum character height can be 40 um, and minimum marking line width 5 um
Features: |
Applications: |
|
|
Specifications:
Optical Typical
Central wavelength (nm) 1064
Operating mode
Pulsed laser
M2 factor 1.2 (1.0-1.5 optional) Waist diameter (μm) 300 Beam divergence, full angle (mrad) 6.5 (customized available) Polarization Random Transverse mode TEM00 Output power (mW)
500, 1000, 1200
Pulse Repetition Frequency (PRF) (kHz) 13.5 (5-25 optional) Pulse width (ns) 18 Pulse energy (μJ) 75 Beam diameter at the aperture (mm) ~1.5 typically Operating temperature (℃) 10~35 (customized available) Laser head cooling type Air-cooling Beam height from base plate (mm) 29 Power supply (90-264VAC) PSU-H-FDA Ave power stability (over 8hrs) 5% Weight (head/ driver, kg) 0.9/ 2.3 Warm-up time (minutes) <10 Dimensions (head, mm) 153(L) ×50(W) ×34.5(H) Warranty 1 year
Diamond planning illustration